From London via M4
Take the M4 towards Bristol and exit at Junction 17. Follow signs for
Poole (A350). Once you have bypassed Chippenham and Lacock you will
enter the village of Beanacre. As you begin to exit the village look
for signs on your left to Beechfield House. Do not take the first
signed entrance (deliveries) but take the second entrance up the
driveway leading to the front of the house.
From Bristol
Take the M4 towards London and exit at Junction 17. Follow signs for
Poole (A350). Once you have bypassed Chippenham and Lacock you will
enter the village of Beanacre. As you begin to exit the village look
for signs on your left to Beechfield House. Do not take the first
signed entrance (deliveries) but take the second entrance up the
driveway leading to the front of the house.
From Bath
From Bath take the A4 towards Chippenham. As you approach Chippenham
you will see signs to the A350. Take the A350 towards Melksham and
Poole. Keep on the A350 and after Lacock you will enter the village of
Beanacre. As you begin to exit the village, look for signs on your left
to Beechfield House. Do not take the first signed entrance (deliveries)
but take the second entrance up the driveway leading to the front of
the house.
From the South via M3
Leave the M3 at junction 8 heading west on the A303. Take the exit for
the A350, just after Chicklade, and continue North until entering the
village of Beanacre. The hotel will then be found immediately on the
right.
From the Southwest
Heading East on the A303, take the exit for the A350, just after West
Knoyle, and continue North until entering the village of Beanacre. The
hotel will then be found immediately on the right.
By rail
Beechfield House is near to two railway stations
Melksham - approximately 2 minutes by car
Chippenham - approximately 15 minutes by car
Chippenham Station is on the mainline London to Bath route.
Taxis can be ordered for you - please contact reception on 01225 703700 in advance of your journey.
|
